Application range of wire brush

Wire brushes, especially wire brush rollers, are usually used in steel or aluminum surface treatment plants. A series of stainless steel wire brush rollers are installed on a full-automatic high-speed brush polishing machine (brushing machine). The wire brush roller rotates at high speed on the upper and lower surfaces of the strip in the opposite direction to the movement of the rolled piece to remove the scale. The brushed iron oxide scale shall be washed away by the closed circulating cooling water flushing system. Generally, the thickness of coil wire is 1.09-6.35mm, and the renewal cycle of wire brush is once for every 20000 t sheet or 40000 t steel coil produced.
The stainless steel ultra-fine elastic wire brush is specially used to clean the ceramic anilox roll. This is because the hardness of the ceramic is far greater than that of the steel wire. The wire brush will not damage the ceramic layer on the anilox roll surface. Ultra-fine elastic copper wire brush is a common and necessary cleaning tool for cleaning chrome-plated metal anilox roll and gravure plate roll, and the effect is better when used with cleaning agent.
Wire brush with wooden handle
Wire brush with wooden handle
The common specification is 6 * 14 or 5 * 14 holes, and the steel wire material is 304 stainless steel wire or ordinary steel wire. Each hole is usually embedded with 5 pieces folded in half, and the extension length of steel wire is about 20 mm. The brush made of ordinary steel wire is easy to rust and is not used. Compared with the wood handle wire brush made of 304 stainless steel wire, the quality of the brush is much different.
Steel wire pipe brush is generally used for industrial pipes, mechanical screw hole cleaning, polishing and cleaning. The pipe brush process is made of steel wire or stainless steel wire sandwiched between two or four strands of iron wire and mechanically twisted